Engineering transplantable human lymphatic and blood capillary networks in a porous scaffold.

Due to a relative paucity of studies on human lymphatic assembly in vitro and subsequent in vivo transplantation, capillary formation and survival of primary human lymphatic (hLEC) and blood endothelial cells (hBEC) ± primary human vascular smooth muscle cells (hvSMC) were evaluated and compared in vitro and in vivo. hLEC ± hvSMC or hBEC ± hvSMC were seeded in a 3D porous scaffold in vitro, and capillary percent vascular volume (PVV) and vascular density (VD)/mm2 assessed. Scaffolds were also transplanted into a sub-cutaneous rat wound with morphology/morphometry assessment. Initially hBEC formed a larger vessel network in vitro than hLEC, with interconnected capillaries evident at 2 days. Interconnected lymphatic capillaries were slower (3 days) to assemble. hLEC capillaries demonstrated a significant overall increase in PVV (p = 0.0083) and VD (p = 0.0039) in vitro when co-cultured with hvSMC. A similar increase did not occur for hBEC + hvSMC in vitro, but hBEC + hvSMC in vivo significantly increased PVV (p = 0.0035) and VD (p = 0.0087). Morphology/morphometry established that hLEC vessels maintained distinct cell markers, and demonstrated significantly increased individual vessel and network size, and longer survival than hBEC capillaries in vivo, and established inosculation with rat lymphatics, with evidence of lymphatic function. The porous polyurethane scaffold provided advantages to capillary network formation due to its large (300-600 µm diameter) interconnected pores, and sufficient stability to ensure successful surgical transplantation in vivo. Given their successful survival and function in vivo within the porous scaffold, in vitro assembled hLEC networks using this method are potentially applicable to clinical scenarios requiring replacement of dysfunctional or absent lymphatic networks.

Brain Computer Interfaces for Improving the Quality of Life of Older Adults and Elderly Patients.

All people experience aging, and the related physical and health changes, including changes in memory and brain function. These changes may become debilitating leading to an increase in dependence as people get older. Many external aids and tools have been developed to allow older adults and elderly patients to continue to live normal and comfortable lives. This mini-review describes some of the recent studies on cognitive decline and motor control impairment with the goal of advancing non-invasive brain computer interface (BCI) technologies to improve health and wellness of older adults and elderly patients. First, we describe the state of the art in cognitive prosthetics for psychiatric diseases. Then, we describe the state of the art of possible assistive BCI applications for controlling an exoskeleton, a wheelchair and smart home for elderly people with motor control impairments. The basic age-related brain and body changes, the effects of age on cognitive and motor abilities, and several BCI paradigms with typical tasks and outcomes are thoroughly described. We also discuss likely future trends and technologies to assist healthy older adults and elderly patients using innovative BCI applications with minimal technical oversight.

Spatial and temporal distribution of E. coli contamination on three inland lake and recreational beach systems in the upper Midwestern United States.

Swimming advisories are commonly posted at public beaches across the United States every year. In Iowa, weekly monitoring of public swimming areas at state and county beaches have resulted in the impairment of numerous lakes for fecal indicator bacteria (FIB) contamination, as detected by E. coli. An extensive study was established to assess the relationships between E. coli contamination of nearshore beach water environments, open lake conditions and beach sands in three recreational beach/lake systems currently impaired for FIB contamination across Iowa. A transect/grab sample based sampling design was implemented across the systems with collections spanning from April through October of 2015 and 2016. Collections of E. coli along water transects identified strong near to far shore gradients of decreasing concentrations in all systems. Results indicate that concentrations of E. coli observed in swimming waters consistently disassociate with concentrations in the broader lake environment. Swimming water E. coli concentrations correlated with elevated beach sand E. coli, samples collected from beach sands uncovered concentrations up to 86,500 times higher than adjacent swimming waters. Results from this study indicate that foreshore beach sands and other beach proximate FIB sources serve as the major contributing source for swimming zone advisories. The current methodology used by state and federal officials includes impairing entire lake waterbodies for FIB contamination of the swimming area. These impairment listings do not accurately reflect the condition(s) of the larger lake environment outside the swimming area and fail to account for beach proximate conditions in the assessment process. Further, this approach provides potentially misleading information to the public and may undermine implementation strategies deployed by resource managers aimed at addressing FIB contamination at recreational swimming areas. Views expressed in this paper are those of the authors and do not necessarily reflect the views or policies of the Iowa Department of Natural Resources.

Selenium nanoparticles as anti-infective implant coatings for trauma orthopedics against methicillin-resistant Staphylococcus aureus and epidermidis: in vitro and in vivo assessment.

Background: Bacterial infection is a common and serious complication in orthopedic implants following traumatic injury, which is often associated with extensive soft tissue damage and contaminated wounds. Multidrug-resistant bacteria have been found in these infected wounds, especially in patients who have multi trauma and prolonged stay in intensive care units.Purpose: The objective of this study was to develop a coating on orthopedic implants that is effective against drug-resistant bacteria. Methods and results: We applied nanoparticles (30-70nm) of the trace element selenium (Se) as a coating through surface-induced nucleation-deposition on titanium implants and investigated the antimicrobial activity against drug resistant bacteria including Methicillin-resistant Staphylococcus aureus (MRSA) and Methicillin-resistant Staphylococcus epidermidis (MRSE) in vitro and in an infected femur model in rats.The nanoparticles were shown in vitro to have antimicrobial activity at concentrations as low as 0.5ppm. The nanoparticle coatings strongly inhibited biofilm formation on the implants and reduced the number of viable bacteria in the surrounding tissue following inoculation of implants with biofilm forming doses of bacteria. Conclusion: This study shows a proof of concept for a selenium nanoparticle coatings as a potential anti-infective barrier for orthopedic medical devices in the setting of contamination with multi-resistant bacteria. It also represents one of the few (if only) in vivo assessment of selenium nanoparticle coatings on reducing antibiotic-resistant orthopedic implant infections.

Bio-engineering a tissue flap utilizing a porous scaffold incorporating a human induced pluripotent stem cell-derived endothelial cell capillary network connected to a vascular pedicle.

Tissue flaps are used to cover large/poorly healing wounds, but involve complex surgery and donor site morbidity. In this study a tissue flap is assembled using the mammalian body as a bioreactor to functionally connect an artery and vein to a human capillary network assembled from induced pluripotent stem cell-derived endothelial cells (hiPSC ECs). In vitro: Porous NovoSorb™ scaffolds (3 mm × 1.35 mm) were seeded with 200,000 hiPSC ECs ±â€¯100,000 human vascular smooth muscle cells (hvSMC), and cultured for 1-3 days, with capillaries formed by 24 h which were CD31+, VE-Cadherin+, EphB4+, VEGFR2+ and Ki67+, whilst hvSMCs (calponin+) attached abluminally. In vivo: In SCID mice, bi-lateral epigastric vascular pedicles were isolated in a silicone chamber for a 3 week 'delay period' for pedicle capillary sprouting, then reopened, and two hiPSC EC ±â€¯hvSMCs seeded scaffolds transplanted over the pedicle. The chamber was either resealed (Group 1), or removed and surrounding tissue secured around the pedicle + scaffolds (Group 2), for 1 or 2 weeks. Human capillaries survived in vivo and were CD31+, VE-Cadherin+ and VEGFR2+. Human vSMCs remained attached, and host mesenchymal cells also attached abluminally. Systemically injected FITC-dextran present in human capillary lumens indicated inosculation to host capillaries. Human iPSC EC capillary morphometric parameters at one week in vivo were equal to or higher than the same parameters measured in human abdominal skin. This 'proof of concept' study has demonstrated that bio-engineering an autologous human tissue flap based on hiPSC EC could minimize the use of donor flaps and has potential applications for complex wound coverage. STATEMENT OF SIGNIFICANCE: Tissue flaps, used for surgical reconstruction of wounds, require complex surgery, often associated with morbidity. Bio-engineering a simpler alternative, we assembled a human induced pluripotent stem cell derived endothelial cell (hiPSC ECs) capillary network in a porous scaffold in vitro, which when transplanted over a mouse vascular pedicle in vivo formed a functional tissue flap with mouse blood flow in the human capillaries. Therefore it is feasible to form an autologous tissue flap derived from a hiPSC EC capillary network assembled in vitro, and functionally connect to a vascular pedicle in vivo that could be utilized in complex wound repair for chronic or acute wounds.

Melatonin promotes survival of nonvascularized fat grafts and enhances the viability and migration of human adipose-derived stem cells via down-regulation of acute inflammatory cytokines.

Nonvascularized fat grafting is a valuable technique for soft tissue reconstruction but poor survival of fat in the host environment remains a problem. A process known as cell-assisted transfer is used to enhance fat graft retention by adding stromal vascular fraction, an adipose-derived stem cell (ASC) rich content to lipoaspirate. We have recently shown that the use of melatonin, a reactive oxygen species scavenger, protects human ASCs from hydrogen peroxide-induced oxidative stress and cell death in vitro but its role as a pharmacological adjunct in clinical fat grafting has not been studied. Herein, the effect of melatonin was examined on human ASCs in vitro using survival and functional assays including the MTT assay, CellTox Green assay, monolayer scratch assay as well as a human cytokine chemoluminescence, and tumour necrosis factor-α assay. Further, the effect of melatonin-treated fat grafts was tested in vivo with a murine model. Haematoxylin and eosin staining, perilipin and CD31 immunostaining were performed with morphometric analysis of adipose tissue. The results demonstrate that, in vitro, the addition of melatonin to ASCs significantly improved their cell-viability, promoted cell migration and preserved membrane integrity as compared to controls. In addition, it induced a potent anti-inflammatory response by downregulating acute inflammatory cytokines particularly tumour necrosis factor-α. For the first time, it is demonstrated in vivo that melatonin enhances fat graft volume retention by reducing inflammation and increasing the percentage of adipose volume within fat grafts with comparable volumes to that of cell-assisted lipotransfer. Based on these novel findings, melatonin may be a useful pharmacological adjunct in clinical fat grafting.

Indomethacin Enhances Fat Graft Retention by Up-Regulating Adipogenic Genes and Reducing Inflammation.

BACKGROUND: Cell-assisted lipotransfer has been promisingly applied to restore soft-tissue defects in plastic surgery; however, the harvesting of stromal vascular fraction increases morbidity and poses potential safety hazards. The authors investigated whether adding indomethacin, an antiinflammatory proadipogenic drug, to the fat graft at the time of transplantation would enhance the final graft volume compared with cell-assisted lipotransfer. METHODS: In vitro, human adipose-derived stem cells were cultured in conditioned growth media supplemented with various doses of indomethacin to investigate adipogenesis and the expression of the adipogenic genes. In vivo, lipoaspirate mixed with stromal vascular fractions or indomethacin was injected into the dorsum of mice. Tissues were harvested at weeks 2, 4, and 12 to evaluate histologic changes. RESULTS: In vitro, polymerase chain reaction analysis revealed that increased up-regulation of adipogenic genes and activation of the peroxisome proliferator-activated receptor-γ pathway. In vivo, the percentage volume of adipocytes in the indomethacin-assisted groups was higher than that in the lipoaspirate-alone (control) group at 12 weeks (p = 0.016), and was equivalent to the volume in the cell-assisted groups (p = 1.000). Indomethacin improved adipose volumes but had no effect on vascularity. A larger number of small adipocytes appeared in the treatment samples than in the controls at 2 weeks (p = 0.044) and 4 weeks (p = 0.021). CONCLUSIONS: Pretreating lipoaspirate with indomethacin enhances the final volume retention of engrafted fat. This result is explained in part by increased adipogenesis and possibly by the inhibition of inflammatory responses.

Porous PLGA microspheres tailored for dual delivery of biomolecules via layer-by-layer assembly.

Tissue engineering is a complex and dynamic process that requires varied biomolecular cues to promote optimal tissue growth. Consequently, the development of delivery systems capable of sequestering more than one biomolecule with controllable release profiles is a key step in the advancement of this field. This study develops multilayered polyelectrolyte films incorporating alpha-melanocyte stimulating hormone (α-MSH), an anti-inflammatory molecule, and basic fibroblast growth factor (bFGF). The layers were successfully formed on macroporous poly lactic-co-glycolic acid microspheres produced using a combined inkjet and thermally induced phase separation technique. Release profiles could be varied by altering layer properties including the number of layers and concentrations of layering molecules. α-MSH and bFGF were released in a sustained manner and the bioactivity of α-MSH was shown to be preserved using an activated macrophage cell assay in vitro. The system performance was also tested in vivo subcutaneously in rats. The multilayered microspheres reduced the inflammatory response induced by a carrageenan stimulus 6 weeks after implantation compared to the non-layered microspheres without the anti-inflammatory and growth factors, demonstrating the potential of such multilayered constructs for the controlled delivery of bioactive molecules.

Macrophage phenotype in response to implanted synthetic scaffolds: an immunohistochemical study in the rat.

Macrophages predominate among the cells that directly interact with biomaterials and are key orchestrators of host-biomaterial interactions. However, the macrophage response to synthetic scaffolds in particular has not been well studied. The aim of this study was therefore to characterise the macrophage response to several synthetic scaffolds in the rat using immunohistological techniques for a panel of markers of macrophage subclass or activation, including ED1 (CD68), ED2 (CD163), CD80, mannose receptor and inducible nitric oxide synthase (iNOS). Materials were implanted subcutaneously and collected after 6-8 weeks during the chronic phase of the host response. Unmodified polycaprolactone scaffolds uniquely demonstrated a total lack of both macrophage adherence to surfaces and a wider foreign body response compared to scaffolds composed of poly(lactic-co-glycolic acid) (PLGA) and polyurethanes (PURs), with those macrophages present having a clear M2 (MR+, CD80-, iNOS-) phenotype. PLGA scaffolds displayed an M1-dominant (CD80+, iNOS+, MR-) response with substantial foreign body giant cell (FBGC) formation, whilst PUR scaffold FBGCs had a more mixed M1 (CD80+, iNOS+) and M2 (MR+) phenotype. The study also identified that the use of the ED1 antibody in the rat as a pan-macrophage marker is problematic as there is a separate and substantial ED2-positive macrophage population that it does not label, both in response to biomaterials and in normal tissues. The biomaterial-dependent nature of activation for both macrophages and FBGCs was confirmed, and nuanced M1/M2 phenotypes were described.

The adipogenic potential of various extracellular matrices under the influence of an angiogenic growth factor combination in a mouse tissue engineering chamber.

The extracellular matrix (ECM) Matrigel™ has frequently and successfully been used to generate new adipose tissue experimentally, but is unsuitable for human application. This study sought to compare the adipogenic potential of a number of alternative, biologically derived or synthetic ECMs with potential for human application, with and without growth factors and a small fat autograft. Eight groups, with six severe combined immunodeficient (SCID) mice per group, were created with bilateral chambers (silicone tubes) implanted around the epigastric vascular pedicle, with one chamber/animal containing a 5mg fat autograft. Two animal groups were created for each of four ECMs (Matrigel™, Myogel, Cymetra® and PuraMatrix™) which filled the bilateral chambers. One group/ECM had no growth factors added to chambers whilst the other group had growth factors (GFs) (vascular endothelial growth factor-A (VEGF-A) plus fibroblast growth factor-2 (FGF-2) plus platelet-derived growth factor-BB (PDGF-BB)) added to both chambers. At 6weeks, chamber tissue was morphometrically assessed for percent and absolute adipose tissue volume. Overall, the triple GF regime significantly increased percent(∗) and absolute(#) adipose tissue volume (p<0.0005(∗#)) compared to chambers without triple GF treatment. The fat autograft also significantly increased percent (p<0.0005) and absolute (p<0.011) adipose tissue volume. Cymetra® (human collagen) constructs yielded the largest total tissue and absolute adipose tissue volume. We found that the pro-angiogenic FGF-2, VEGF-A and PDGF-BB combination in ECMs of synthetic and biological origin produced an overall significantly increased adipose tissue volume at 6weeks and may have clinical application, particularly with Cymetra.

Genetic overlap between evoked frontocentral theta-band phase variability, reaction time variability, and attention-deficit/hyperactivity disorder symptoms in a twin study.

BACKGROUND: Electrophysiological and hemodynamic activity is altered in attention-deficit/hyperactivity disorder (ADHD) during tasks requiring cognitive control. Frontal midline theta oscillations are a cortical correlate of cognitive control influencing behavioral outcomes including reaction times. Reaction time variability (RTV) is consistently increased in ADHD and is known to share genetic effects with the disorder. The etiological relationship between the cognitive control system, RTV, and ADHD is unknown. In a sample of twins selected for ADHD and matched control subjects, we aimed to quantify the strength of the phenotypic, genetic, and environmental relationships between event-related midline theta oscillations, RTV, and ADHD. METHODS: Our sample included 134 participants aged 12 to 15 years: 67 twin pairs (34 monozygotic; 33 dizygotic) with concordance or discordance for ADHD symptomatology assessed at 8, 10, and 12 years of age. Our main outcome measures were frontal midline theta activity, derived from both channel and source decomposed electroencephalographic data, and behavioral performance on a response-choice arrow flanker task known to elicit theta activity. RESULTS: Variability in stimulus event-related theta phase from frontal midline cortex is strongly related to both RTV and ADHD, both phenotypically and genetically. CONCLUSIONS: This is the first finding to confirm the genetic link between the frontal midline cognitive control system and ADHD and the first to identify a genetically related neurophysiological marker of RTV in ADHD. Variability in the timing of the theta signal in ADHD may be part of a dysfunctional brain network that impairs regulation of task-relevant responses in the disorder.

Enhanced liver progenitor cell survival and differentiation in vivo by spheroid implantation in a vascularized tissue engineering chamber.

Liver tissue engineering is hampered by poor implanted cell survival due to inadequate vascularization and cell-cell/cell-matrix interactions. Here, we use liver progenitor cell (LPC) spheroids to enhance cell-cell/cell-matrix interactions, with implantation into an angiogenic in vivo mouse chamber. Spheroids were generated in vitro in methylcellulose medium. Day 2 spheroids were optimal for implantation (22,407 +/-645 cells/spheroid), demonstrating maximal proliferation (Ki67 immunolabeling) and minimal apoptosis (caspase-3 immunolabelling). In vivo chambers established bilaterally on epigastric vessels of immunodeficient mice were implanted with equivalent numbers of LPCs as a cell suspension (200,000 cells), or spheroids (9 spheroids). At day 14, a trend of increased LPC survival was observed in spheroid-implanted chambers [pan-cytokeratin (panCK+) cells, p = 0.38, 2.4 fold increase)], with significantly increased differentiation [cytokeratin 18 (CK18+) cells, p < 0.002, 5.1 fold increase)] compared to cell suspension-implanted chambers. At day 45, both measures were significantly increased in spheroid-implanted chambers (panCK, p < 0.006, 16 fold increase) (CK18, p < 0.019, 6 fold increase). Hepatic acini/plates of CK18 + cells expressed hepatocyte nuclear factor 4-α and ß-catenin, indicating ongoing hepatic differentiation. Spheroid cell-delivery significantly increased LPC survival and differentiation compared to conventional cell suspensions. This LPC spheroid/vascularized chamber model has clinical potential to generate three-dimensional vascularized liver tissue for liver replacement.

Preparation of an adipogenic hydrogel from subcutaneous adipose tissue.

The ability to generate controlled amounts of adipose tissue would greatly ease the burden on hospitals for reconstructive surgery. We have previously shown that a tissue engineering chamber containing a vascular pedicle was capable of forming new fat; however, further refinements are required to enhance fat formation. The development and maintenance of engineered adipose tissue requires a suitable source of growth factors and a suitable scaffold. A hydrogel derived from adipose tissue may fulfil this need. Subcutaneous fat was processed into a thermosensitive hydrogel we refer to as adipose-derived matrix (ADM). Protein analysis revealed high levels of basement membrane proteins, collagens and detectable levels of growth factors. Adipose-derived stem cells exposed to this hydrogel differentiated into adipocytes with >90% efficiency and in vivo testing in rats showed significant signs of adipogenesis after 8 weeks. ADM's adipogenic properties combined with its simple gelation, relatively long shelf life and its tolerance to multiple freeze-thaw cycles, makes it a promising candidate for adipose engineering applications.

The in vitro preconditioning of myoblasts to enhance subsequent survival in an in vivo tissue engineering chamber model.

The effects of in vitro preconditioning protocols on the ultimate survival of myoblasts implanted in an in vivo tissue engineering chamber were examined. In vitro testing: L6 myoblasts were preconditioned by heat (42 °C; 1.5 h); hypoxia (<8% O(2); 1.5 h); or nitric oxide donors: S-nitroso-N-acetylpenicillamine (SNAP, 200 µM, 1.5 h) or 1-[N-(2-aminoethyl)-N-(2-aminoethyl)amino]-diazen-1-ium-1,2-diolate (DETA-NONOate, 500 µM, 7 h). Following a rest phase preconditioned cells were exposed to 24 h hypoxia, and demonstrated minimal overall cell loss, whilst controls (not preconditioned, but exposed to 24 h hypoxia) demonstrated a 44% cell loss. Phosphoimmunoblot analysis of pro-survival signaling pathways revealed significant activation of serine threonine kinase Akt with DETA-NONOate (p < 0.01) and heat preconditioning (p < 0.05). DETA-NONOate also activated ERK 1/2 signaling (p < 0.05). In vivo implantation: 100,000 preconditioned (heat, hypoxia, or DETA-NONOate) myoblasts were implanted in SCID mouse tissue engineering chambers. 100,000 (not preconditioned) myoblasts were implanted in control chambers. At 3 weeks, morphometric assessment of surviving myoblasts indicated myoblast percent volume (p = 0.012) and myoblasts/mm(2) (p = 0.0005) overall significantly increased in preconditioned myoblast chambers compared to control, with DETA-NONOate-preconditioned myoblasts demonstrating the greatest increase in survival (p = 0.007 and p = 0.001 respectively). DETA-NONOate therefore has potential therapeutic benefits to significantly improve survival of transplanted cells.

Coating and release of an anti-inflammatory hormone from PLGA microspheres for tissue engineering.

Many biomaterials used in tissue engineering cause a foreign body response in vivo, which left untreated can severely reduce the effectiveness of tissue regeneration. In this study, an anti-inflammatory hormone α-melanocyte stimulating hormone (α-MSH) was physically adsorbed to the surface of biodegradable poly (lactic-co-glycolic) acid (PLGA) microspheres to reduce inflammatory responses to this material. The stability and adsorption isotherm of peptide binding were characterized. The peptide secondary structure was not perturbed by the adsorption and subsequent desorption process. The α-MSH payload was released over 72 h and reduced the expression of the inflammatory cytokine, Tumor necrosis factor-α (TNF-α) in lipopolysaccharide activated RAW 264.7 macrophage cells, indicating that the biological activity of α-MSH was preserved. α-MSH coated PLGA microspheres also appeared to reduce the influx of inflammatory cells in a subcutaneous implantation model in rats. This study demonstrates the potential of α-MSH coatings for anti-inflammatory delivery and this approach may be applied to other tissue engineering applications.

A prevascularized tissue engineering chamber supports growth and function of islets and progenitor cells in diabetic mice.

Recent studies have shown that type 1 diabetes can be reversed in a murine model by islet transplantation to a vascularized tissue engineering chamber. In preliminary experiments using a prevascularized chamber we observed that islet grafts not functioning initially can show a delayed onset of function several weeks after implantation. We sought to characterize this phenomenon. Islets were transplanted into prevascularized tissue engineering chambers based on the epigastric vessels in streptozotocin induced diabetic C57BL/6J mice. Animals were transplanted with 500 islets and observed at 1, 4, 8 and 16 weeks post transplantation. Weekly blood glucose (BG) measurements revealed an average onset of maintained graft function 6.8 weeks post transplantation. Graft function was proven by a return to a diabetic state following chamber removal. Mature grafts showed islet tissue clustered together within the tissue construct. The quantity of endocrine tissue staining positive for insulin correlated with graft function at 8 and 16 weeks. However, at 1 and 4 weeks, islet tissue was not evidently visible as observed by endocrine staining. All islet tissue showed dense vascularization and sporadic sympathetic innervation, irrespective of the graft's function. Immunopositive cells for Cytokeratin-7 and -19 were observed in the grafts at early time points and hormone producing cells appear to have been differentiated from these progenitors. Our data demonstrates that pancreatic duct-derived progenitors remain viable in vivo and eventually differentiate and mature to functional islets following transplantation. Our prevascularized tissue-engineering chamber in the groin supports maturation and function of the grafted tissue by two months after implantation.

Expansion and hepatocytic differentiation of liver progenitor cells in vivo using a vascularized tissue engineering chamber in mice.

Current cell-based treatment alternatives to organ transplantation for liver failure remain unsatisfactory. Hepatocytes have a strong tendency to dedifferentiate and apoptose when isolated and maintained in culture. In contrast, liver progenitor cells (LPCs) are robust, easy to culture and have been shown to replace damaged hepatocytes in liver disease. In this study we investigate whether isolated LPCs can survive and differentiate toward mature hepatocytes in vivo when implanted into a heterotopic mouse tissue engineering chamber model. Healthy Balb/c mice and those put on a choline-deficient ethionin-supplemented diet to induce chronic liver disease were implanted with a tissue engineering chamber based on the epigastric flow through pedicle model, containing either 1 × 10(6) LPCs suspended in Matrigel, or LPC-spheroids produced by preculture for 1 week in Matrigel. Four weeks after implantation the chamber contents were harvested. In all four groups, progenitor cells persisted in large numbers to 4 weeks and demonstrated evidence of considerable proliferation judged by Ki67-positive cells. Periodic acid Schiff staining demonstrated differentiation of some cells into mature hepatocytes. Constructs grown from LPC-spheroids demonstrated considerably greater LPC survival than those from LPCs that were grown as monolayers and implanted as dissociated cells. The combined use of LPC spheroids and the vascularized chamber model could be the basis for a viable alternative to current treatments for chronic liver failure.

An "off the shelf" vascular allograft supports angiogenic growth in three-dimensional tissue engineering.

OBJECTIVES: Dense angiogenic sprouting occurs from arteriovenous loops (AVLs) incorporating autologous vein grafts inserted into empty plastic chambers in vivo. The purpose of this study was to determine if angiogenesis from the AVL was limited by substituting an "off the shelf" cold-stored allograft vein instead of an autologous vein. METHODS: Four Sprague Dawley rat groups (two AVL configurations × two chamber types) were established for both 2-week and 6-week harvest. Control AVLs were autologous femoral vein grafts harvested from the left femoral vein that were surgically inserted between the cut femoral artery and vein on the right side. Experimental "allograft" AVLs were rat femoral veins cold-stored (4°C, sterile) for 4 to 7 weeks and then microsurgically interposed between the right femoral artery and vein of an unrelated rat. The two AVL types were inserted in one of two plastic chamber types--smooth or perforated. At harvest, the AVL constructs were checked for patency, weighed, their volume determined, and histology undertaken. Morphometric assessment of percent and absolute volume of major tissue components (including blood vessels) at 6 weeks was completed. RESULTS: There were no significant differences between autograft and allograft groups in construct weight, volume, or morphology at 2 or 6 weeks. No statistical differences occurred in the percent or absolute vascular volume of AVLs incorporating a cold-stored allograft vs autologous vein grafts at 6 weeks regardless of the chamber type. However, perforated chambers caused significant increases in construct weight (P = .015), volume (P = .006), and percent and absolute connective tissue volume at 6 weeks (P = .001) compared to smooth chamber constructs, regardless of the graft type. CONCLUSION: Cold-stored small-caliber allografts interposed in AVLs do not inhibit microcirculatory development and can be used in composite tissue engineering.

Epoxy-amine synthesised hydrogel scaffolds for soft-tissue engineering.

Highly porous and biodegradable hydrogels based on poly(ethylene glycol) (PEG) and cystamine (Cys) were fabricated using epoxy-amine chemistry and investigated as scaffolds for soft-tissue engineering. Whereas the application of fused-salt templates provided a comprehensive interconnecting pore morphology, the incorporation of a specially designed poly(epsilon-caprolactone) (PCL) cross-linker provided enhanced mechanical function without adversely effecting the scaffolds positive biological interactions. The addition of only 1.2 wt% of the PCL cross-linker was sufficient to provide improvements in the ultimate stress of 30-40%. In vitro studies not only confirmed the non-cytotoxic nature of the scaffolds, but also their degradation products, which were isolated and characterised by nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionisation time-of-flight mass spectroscopy (MALDI ToF MS). In vivo trials were conducted over a period of 8 weeks through implantation of the scaffolds into the dorsal region of rats. At both 2 and 8 week time points the explants revealed complete infiltration by the surrounding tissue and the development of a vascular network to support the newly generated tissue, without an excessive foreign-body response.